ALL-FLO 3" AIR DIAPHRAGM PUMP > AOD 펌프

홈으로 즐겨찾기
  • 블로그바로가기
  • 건아테크명함
리뷰 0 위시 3

ALL-FLO 3" AIR DIAPHRAGM PUMP 요약정보 및 구매

판매가격 전화문의
배송비결제 주문시 결제

상품 정보

상품 상세설명

198cba3ef33f27921237dc4f80827bbf_1539586879_6355.jpg


3" A300 Aluminum

Up to 255 GPM

Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT

3" A300 Aluminum

Part No.Fluid EndAir EndDiaphragmsValve/BallValve SeatsO-RingsConnection TypeFluid Porting
A300-BAA-GGNN-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-GGNN-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-GTNN-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-GTNN-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-SSEE-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-SSEE-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-TTYT-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. NylonA non-metallic material, suitable for most solvents and oils. PTFEThermoplastic material that is inert to most chemicals. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-TTYT-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. NylonA non-metallic material, suitable for most solvents and oils. PTFEThermoplastic material that is inert to most chemicals. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-TTYT-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. NylonA non-metallic material, suitable for most solvents and oils. PTFEThermoplastic material that is inert to most chemicals. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-VVYV-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NylonA non-metallic material, suitable for most solvents and oils. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-BAA-VVYV-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NylonA non-metallic material, suitable for most solvents and oils. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. BSPBSP ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-GGNN-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-GGNN-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-GTNN-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-GTNN-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. NitrileGeneral purpose elastomer used on water and most non synthetic oils.NitrileGeneral purpose elastomer used on water and most non synthetic oils.NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-SSEE-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-SSEE-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-TTYT-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. NylonA non-metallic material, suitable for most solvents and oils. PTFEThermoplastic material that is inert to most chemicals. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-TTYT-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. NylonA non-metallic material, suitable for most solvents and oils. PTFEThermoplastic material that is inert to most chemicals. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-VVVV-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-VVYV-B30AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NylonA non-metallic material, suitable for most solvents and oils. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NPTSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-NAA-VVYV-B40AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NylonA non-metallic material, suitable for most solvents and oils. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. NPTSuction Center Front/Discharge Center Rear

3" A300 Stainless

Up to 255 GPM

Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT

3" A300 Stainless

Part No.Fluid EndAir EndDiaphragmsValve/BallValve SeatsO-RingsConnection TypeFluid Porting
A300-FA3-GG3N-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-GG3N-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-GN3N-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-GN3N-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. NitrileGeneral purpose elastomer used on water and most non synthetic oils.Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-GT3N-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-GT3N-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumGeolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. PTFEThermoplastic material that is inert to most chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. NitrileGeneral purpose elastomer used on water and most non synthetic oils.ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-SS3E-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. EPDMGeneral purpose elastomer with good resistance to many acids and basis. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-SS3E-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumSantoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. EPDMGeneral purpose elastomer with good resistance to many acids and basis. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-TT3T-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. PTFEThermoplastic material that is inert to most chemicals. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-TT3T-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumPTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. PTFEThermoplastic material that is inert to most chemicals. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-VV3V-B70Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear
A300-FA3-VV3V-B80Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. AluminumAluminumViton®Elastomer with good chemical resistance to a wide variety of chemicals. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. Viton®Elastomer with good chemical resistance to a wide variety of chemicals. ANSI / DIN FlangeANSI / DIN Flange ConnectionSuction Center Front/Discharge Center Rear

3" P300 Polyethylene

Up to 255 GPM

Elastomer Available in: EPDM, PTFE
Liquid Connections Available in: FNPT, FBSPT, ANSI/DIN Flange
Max Solids: 9/16 Inch (15mm)
Max Suction Lift (Dry): 16.4ft-H20 (5m)
Max Suction Lift (Wet): 29.5ft-H20 (9m)
Air Inlet: 3/4 Inch FNPT

3" P300 Polyethylene

Part No.Fluid EndAir EndDiaphragmsValve/BallValve SeatsO-RingsConnection TypeFluid Porting
P300-AHH-EEHE-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. HDPE High-density polyethylene EPDMGeneral purpose elastomer with good resistance to many acids and basis. ANSI FlangeANSI Flange ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-AHH-PTHT-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)PTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. HDPE High-density polyethylene PTFEThermoplastic material that is inert to most chemicals. ANSI FlangeANSI Flange ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-BHH-EEHE-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. HDPE High-density polyethylene EPDMGeneral purpose elastomer with good resistance to many acids and basis. BSPBSP ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-BHH-PTHT-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)PTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. HDPE High-density polyethylene PTFEThermoplastic material that is inert to most chemicals. BSPBSP ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-DHH-EEHE-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. HDPE High-density polyethylene EPDMGeneral purpose elastomer with good resistance to many acids and basis. DIN FlangeDIN Flange ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-DHH-PTHT-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)PTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. HDPE High-density polyethylene PTFEThermoplastic material that is inert to most chemicals. DIN FlangeDIN Flange ConnectionCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-NHH-EEHE-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)EPDMGeneral purpose elastomer with good resistance to many acids and basis. EPDMGeneral purpose elastomer with good resistance to many acids and basis. HDPE High-density polyethylene EPDMGeneral purpose elastomer with good resistance to many acids and basis. NPTCenter Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back.
P300-NHH-PTHT-G70FDA Buna-NFDA accepted Buna-N. HDPE (High-density Polyethylene)HDPE (High-density Polyethylene)PTFEThermoplastic material that is inert to most chemicals. PTFEThermoplastic material that is inert to most chemicals. HDPE High-density polyethylene PTFEThermoplastic material that is inert to most chemicals. NPTCenter Suction & Discharge w/ 180° Adjustable Rotation
 

 


 


사용후기

등록된 사용후기

사용후기가 없습니다.

상품문의

등록된 상품문의

상품문의가 없습니다.

배송정보

배송 안내 입력전입니다.

교환/반품

교환/반품 안내 입력전입니다.